Rotted Sill, Caught in Time
Decay cut out completely and rebuilt in real wood — no filler, no new window.
A soft sill under good glass is a carpentry job, not a demolition order. We cut every trace of rot out, mill an exact-profile replacement in real wood, and splice it in — from $375. Never filler, never foam, never paint over decay.
Real WowFix job — drag to see the difference.
Real WowFix job — drag to see the difference.
The same price we quote on the phone. Tell us what's going on — or just snap a photo — and see your estimate instantly.
Estimated price
$0
Preliminary estimate — your final price is confirmed on-site at booking. No surprises.
Not sure what it is?
Buyers pay a premium for the mature oaks and hickories shading a Riverside or Huntcliff lot — then discover the fine print. Under that canopy, a north-facing sill can stay damp for days after each of Georgia's fifty annual inches of rain, and along the Chattahoochee corridor the river's morning humidity slows the drying further. The '60s and '70s ranches and split-levels here carry original wood windows — genuinely good lumber, milled in profiles no supplier stocks anymore — but sixty years of wet-dry cycling finds every hairline in the paint film. Water slips into the joint, the shade holds it there, and the sill goes soft from the inside while the surface still photographs fine.
The shortcut everyone gets offered is a knife of wood filler pressed into the soft spot and paint rolled over the scar. Twelve months later it's soft again, because the fungus never stopped working under the patch. Our method is the opposite of cosmetic: probe until the true edge of sound wood is found, saw the decay out with clean square cuts, then mill a replacement piece from laminated lumber that reproduces the original profile — every ogee, bevel and drip kerf — and splice it in so tightly that primer and paint erase the joint. A renovated '70s ranch keeps its original window lines; the repair outlasts the wood it replaced.
Probe, price, mill, splice — the discipline that keeps sixty-year-old houses out of the replacement funnel.
We chart the real extent of decay — under paint, through joints, along sill horns — before quoting a single number.
Window wood from $375, door wood from $475 — every piece itemized on the written quote before a saw touches the house.
The replacement is milled from laminated lumber to the original profile and spliced in with joints tight enough to vanish under finish.
Sanded, primed, painted and sealed against the weather — with a 5-year written workmanship warranty behind it.
Rot repair in Sandy Springs prices by the piece, straight from the printed catalog we carry into every metro — and it goes in writing before any cutting:
Every repair comes with a written workmanship warranty. If it's not right, we come back and make it right.
We fix the part that failed — glass, seal, sash or hardware — so you keep your windows and skip full-replacement cost.
Your repair is done by our own technicians, never subcontracted — visits run on scheduled routes with a firm appointment date.
A clear quote before any work starts. No hidden fees, no upsells, no pressure to replace what we can repair.
Drag the handle to compare — swipe or tap a dot for more jobs.
We rebuild rotted wood across Sandy Springs — the canopy-shaded ranches of Riverside and High Point, the river-corridor homes off Powers Ferry, the mid-century streets around City Springs — and throughout the metro on scheduled routes.
In Sandy Springs
Also in Sandy Springs
Book your service today
No stock footage, no actors — this is one of our actual jobs. Watch a rotted, fogged-out window brought back to flawless, like-new condition.
Snap a clear photo of every foggy, cracked or stuck window in natural light. Morning light shows fog between the panes best and lets us quote faster — often before we arrive.
Jot down the symptom per window — fog between the glass, won't open or stay up, draft, cracked pane, or rotted frame. It tells us whether it's a glass-only swap (from $198) or hardware/wood work.
Move furniture, blinds and décor back roughly three feet so our crew can measure and work safely. It keeps the visit quick and your things out of the way.
If you have the original window brand, a sticker in the frame, or install paperwork, set it aside. It's not required, but it helps us match glass and parts on the first trip.
Unlock gates, secure pets, and clear the exterior path to the windows. Most glass-unit work is done from both sides, so outside access keeps everything one visit.
Decay cut out completely and rebuilt in real wood — no filler, no new window.
We fabricate an exact-profile piece from laminated lumber and splice it in.
New glass built to the window's exact size — frame and trim untouched.
The pane is the part that failed — so the pane is the part we replace.
A failed seal, not a failed window: the sealed unit is swapped, the frame stays.
Rotted bottom rebuilt on-site — a fraction of the ~$10,000 a new door runs.
Real jobs, real photos — swipe for more.
Lead Window & Door Repair Specialist
This content is written by Eugene Ko, a master craftsman with 17+ years of hands-on experience in residential and commercial window repair. Eugene has personally completed over 15,000 window and door repairs across North Carolina, so every answer here is grounded in real field experience — not guesswork.
Last updated: July 17, 2026