Rotted Sill, Caught in Time
Decay cut out completely and rebuilt in real wood — no filler, no new window.
A sill that gives under your thumb isn't a verdict on the window. We remove the decay entirely, mill an exact duplicate of the piece in real wood, and splice it in — from $375. No filler troweled over rot, ever.
Real WowFix job — drag to see the difference.
Real WowFix job — drag to see the difference.
The same price we quote on the phone. Tell us what's going on — or just snap a photo — and see your estimate instantly.
Estimated price
$0
Preliminary estimate — your final price is confirmed on-site at booking. No surprises.
Not sure what it is?
Before the townhomes, Smyrna housed the workforce of the Bell Aircraft plant, and the compact cottages that went up around the war years — Belmont Hills, Smyrna Heights, the mid-century streets within a jonquil's throw of today's Village Green — still carry their original wood sills, sashes and brickmould. That lumber is old-growth and worth saving, but it's been drinking Georgia weather for seventy-five years, and every hairline in the paint film is a straw. The decades since added their own victims: cedar and finger-jointed trim on the '80s subdivisions, primed once and forgotten, plus the irrigation systems that mist the same sill corner every morning before the sun can dry it. Wherever the water lingers — shaded north faces, planter beds pushed against the siding, a gutter that overshoots — the wood underneath goes quietly soft.
Somebody will offer to smear the soft spot with filler and paint it. Twelve months later the paint splits and the rot underneath has kept eating — because covering decay never stopped decay. Our method is a carpenter's, start to finish: probe until we find where honest, sound wood begins; cut everything soft away to clean square edges; then mill a duplicate of the missing piece from laminated lumber — matching the cottage sill's nose, the sash's bevel, the drip kerf underneath — and splice it in so tightly the seam vanishes under primer. The Bell-era houses keep the faces they were built with. The '80s trim comes back tougher than the tract builder ever specified. And because rot always has a supplier, the assessment names the water source — the overshooting gutter, the tired caulk joint, the sprinkler head aimed at the house — so the repair is the last one that corner needs.
Find the boundary, price the pieces, mill the wood, make the seam vanish — in that order, every time.
We trace where the decay actually stops — under paint, into corner joints, along the sill horns — because the honest boundary, not the visible stain, defines the repair.
Window wood from $375, door wood from $475, each element its own line on a written quote you hold before any cutting begins.
The replacement is milled from laminated lumber to the original profile — nose, bevels, drip kerf — and spliced into sound wood with joints that disappear.
Primed, painted, caulked watertight, and the feeding water source flagged — all backed by a 5-year written workmanship warranty.
Rot repair in Smyrna is priced by the piece from the same printed catalog we carry in every metro — every number in writing before the saw comes out:
Every repair comes with a written workmanship warranty. If it's not right, we come back and make it right.
We fix the part that failed — glass, seal, sash or hardware — so you keep your windows and skip full-replacement cost.
Your repair is done by our own technicians, never subcontracted — visits run on scheduled routes with a firm appointment date.
A clear quote before any work starts. No hidden fees, no upsells, no pressure to replace what we can repair.
Drag the handle to compare — swipe or tap a dot for more jobs.
We rebuild rotted wood across Smyrna — the post-war cottages of Belmont Hills and Smyrna Heights, the established streets of Williams Park and Forest Hills, the '80s subdivisions beyond — and throughout the metro on scheduled routes.
In Smyrna
Also in Smyrna
Book your service today
No stock footage, no actors — this is one of our actual jobs. Watch a rotted, fogged-out window brought back to flawless, like-new condition.
Snap a clear photo of every foggy, cracked or stuck window in natural light. Morning light shows fog between the panes best and lets us quote faster — often before we arrive.
Jot down the symptom per window — fog between the glass, won't open or stay up, draft, cracked pane, or rotted frame. It tells us whether it's a glass-only swap (from $198) or hardware/wood work.
Move furniture, blinds and décor back roughly three feet so our crew can measure and work safely. It keeps the visit quick and your things out of the way.
If you have the original window brand, a sticker in the frame, or install paperwork, set it aside. It's not required, but it helps us match glass and parts on the first trip.
Unlock gates, secure pets, and clear the exterior path to the windows. Most glass-unit work is done from both sides, so outside access keeps everything one visit.
Decay cut out completely and rebuilt in real wood — no filler, no new window.
We fabricate an exact-profile piece from laminated lumber and splice it in.
New glass built to the window's exact size — frame and trim untouched.
The pane is the part that failed — so the pane is the part we replace.
A failed seal, not a failed window: the sealed unit is swapped, the frame stays.
Rotted bottom rebuilt on-site — a fraction of the ~$10,000 a new door runs.
Real jobs, real photos — swipe for more.
Lead Window & Door Repair Specialist
This content is written by Eugene Ko, a master craftsman with 17+ years of hands-on experience in residential and commercial window repair. Eugene has personally completed over 15,000 window and door repairs across North Carolina, so every answer here is grounded in real field experience — not guesswork.
Last updated: July 18, 2026